vMix provides all of the features of a hardware control surface. With a click of a mouse or the touch of a finger,
the operator can turn channels on and off, change fader levels or change input routing, as well as controlling the EQ, pan and monitor systems.
vMix operates on a Windows XP, Vista, or Windows 7* computer using either a CRT or flat panel XGA display. This PC communicates with Supervisor software by an IP network connection. Vmix, used on a computer with a modem, can connect to a remote location and have full control of the Audio Engine. vMix allows many new operating alternatives for the Logitek Audio Engine.
Additional Information:
• Use the Change button over each fader to change the source assignment for the fader, trim,
mode (stereo, mono, phase inverse, left only, right only, left/silence, silence/right), the bus
• Each fader has a dedicated cue button for previewing content.
• Each fader has a dedicated talkback button for communicating with remote through
• On/Off buttons for each fader behave like on/off buttons on a physical console,
• The monitor section provides independent control of studio, control room, and
• Each channel may be configured to show pre-fader meters** next to the virtual fader knob.
• Two stereo bargraph meters display program audio and the source routed to the monitors.
*vMix is compatible with Mac using appropriate Windows emulation software.
**EQ, dynamics, and pre-fader meters are standard on all JetStreams and Audio Engines equipped with SHARC Attack cards. These features are not available on Audio Engines equipped with Lone SHARC cards.
Purchasing Information: vMix is included with the purchase of a JetStream and is an option with the Audio Engine.
It is especially useful for people who need to access the Logitek system remotely. Vmix needs a JetStream or
Audio Engine to function and can either operate in parallel with a physical console or in place of one.
Contact Logitek Sales for details.
