Now you can control outputs of the Logitek Audio Engine feeding recorders or other fixed destinations without using a full console control surface. The Route-3 gives full menu selection control for 3 devices with a simple, easy to learn interface in a 1 RU box. Just press the Channel 1, Channel 2, or Channel 3 selection button, dial up the desired Engine input with the Select knob and press the Confirm button.
The same labels that display on any Logitek Control Surface appear on the LCD menu display for each input selected. The allowed inputs on each selector are easily set up using AEConfig software, the same as for the Control Surfaces. RS-485 input and output connectors allow daisy-chaining up to 5 Route-3 units on one Audio Engine port (depending on the hardware and configuration of the Engine). The bottom line of the LCD display may also show custom labels using Command Library or Command Builder functions that you can create to match your needs.
The Route-3 is another great interface and control option to expand the functionality of the Logitek Digital Audio System. Route-3 Datasheet
Now you can have full input and output control of the Audio Engine Router from a single rack unit panel. Controls on the Route-XY give you selection control of any input to any output. Multiple selections of an input to multiple outputs is supported.
Up to 12 Route-XY panels may be connected in series from one Audio Engine port. This allows you to provide routing control to many physical locations using a minimum number of Engine control ports.
The usefulness of the Route-XY is enhanced by Supervisor and Command Builder software since they allow you to create a variety of custom command controls and functions both internal to the Audio Engines and Consoles, but also in external devices attached to the Logitek System.
Among the many functions of the Logitek Audio Engine is its ability to act as an intercom system. Intercom functions can be run from the various control surfaces (Mosaic, Remora, etc.). With the COM-12 Intercom Panel, you can have independent operation of intercom functions in parts of your facility that do not have control surfaces. The COM-12 panel includes a microphone preamplifier, loudspeaker and 12 lighted pushbuttons in a 1 RU enclosure. Buttons can be programmed to talk to any Logitek Control Surface or other COM-12 unit attached to the system. Groups of stations can be combined into all call buttons; the COM-12 has access to all routing, networking and control functions of the Audio Engine. If additional call buttons are needed, the BTN-12 panel provides cost-effective expansion of an intercom station.
The COM-12 connects to a control surface port on the Audio Engine. Up to twelve units may be daisy chained onto the same engine port.
Traditional intercom functions are available via the Audio Engine. Multiple levels of access priority are supported; talkback and IFB to telephone or ISDN lines are also available. Most intercom implementations will require the use of the Logitek Supervisor program (included with the purchase of an Audio Engine). COM-12 Datasheet
Control operation functions of the Logitek Audio Engine or any external device attached to the Engine from a single rack space. The Button 12 panel gives flexible, programmable function control of many devices with a simple, compact push button panel. Just push any button on the panel and the function you have set up will occur. These functions can include a variety of external devices controlled by GPI connected to an Audio Engine, or if you are using Supervisor software, any external device controlled by GPI or serial port data. Do you need to change a satellite channel? Program a single button to do the job through the Audio Engine. Do you want an easily accessible snapshot of the control surface? Again, let a single button do the job. The Button 12 is ideal for the equipment room rack or other locations where you need functional controls but there is no room or need for a console control surface.
The usefulness of the Button 12 is enhanced by Supervisor and Command Builder software since they allow you to create a variety of custom command controls and functions both internal to the Audio Engines and Consoles, but also in external devices attached to the Logitek System.
The Button 12 is also useful to add GPI input and control relays to an existing system. The Button 12 includes 16 programmable relays and 16 isolated pull-to-ground inputs for general purpose interfacing to other devices. In addition, several Button 12 units may be daisy-chained from one Engine Control Surface Port for added functionality.
Give your in-studio guests control over their own headphone/monitor levels and microphone on/off functions in your Logitek Console Router System. Logitek’s GST-20 and GST-22 panels make this easy. The GST-20 (above) is a rackmount version which contains its own power supply. Up to twelve units can be daisy chained from one Audio Engine COM port.
The GST-22 panel (below) is designed to drop into a table cutout; it contains an amplifier and gain control for one pair of headphones. An external power supply will power up to six of these panels.
